DTG Printer – Two Applications to Take Into Account Whenever Acquiring a DTG Printer.

Do you want to add a photo to the quilt that looked a lot more like section of the fabric than an iron-on decal?

Before, we trusted photo transfer paper to iron our photo onto our quilt block. Have you ever heard about direct-to-garment printing? It's a great new way of getting your best photo away from your scrapbook and to your quilt block.

Direct-to-garment (DTG) printing is a kind of digital printing. Using a value of about $20,000, it's not practical to run out and get your very own DTG printer. The common price for coffee printer is $8 to $10.

This method is a little more costly than the traditional photo transfer method. That's partially for the reason that technology is so new. Should you do decide to try a DTG photo in your memory quilt block, there are a few things to look for in selecting the printer who will perform do the job:

1. Make certain there are no chemicals necessary to pre-treat your fabric first. Some DTG printers create a photo that may be a lot more like screen printing. You don't want that appear to be or feel in your quilt. The ink will probably be hard on the top of the material and will eventually (sometimes much earlier than later) will begin to crack and wear with washings. Ask your prospective printer to see a sample of something they've printed. Whenever you can notice the ink is raised over the surface in any respect in any way, it's probably a sublimation type process which requires chemicals to pre-treat the material.

2. Use a form of digital DTG printing available from the Brother GT 541. You can find no chemicals needed to pre-treat the material. The inks bond with the natural fibers and therefore are heat cured to put the graphic. The inks are water based, which will help leave a soft yet crisp image on the fabric.

There are some downfalls to using led uv printer in your quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form an electronic digital printing, there is no white ink. White is the absence of color. Consequently you cannot print a photograph on dark blue or black fabric.

Digital garment or fabric printing is a CMYK format - cyan, magenta, yellow, and black. You are able to mix those colors to have a full spectrum of accurate colors - just not white. There are actually DTG printers that print white ink, but many of the require chemical pre-management of the material and can give you that thick surface print.

You need to work with a light colored or neutral fabric and it needs to be cotton or a cotton blend. The material must be able to withstand 350 degrees for about half a minute. In case you are not 09dexypky with one hundred percent cotton or possibly a 50/50 blend, ask your printer if the fabric will work.

Scale of your print might be a limitation. Most DTG printers have a printing field approximately 14 inches x 16 inches. For many quilters, that size range won't be considered a problem.

And speaking of printing fields, here's a hint. Most direct to dtg printer charge for the 14x16 surface. If your blocks enables 2 or 3 photos to fit within that range, you can get all of them printed for the buying price of one. Talk with the printer to see if it's possible with your particular project.

Like other technological advances, the cost of digital garment (or fabric) printing probably will decrease after a while. Maybe it is going to also be available on smaller printers for home and private use. For the time being, see if you can look for a DTG printer for your forthcoming photo quilt project. The final results will look like custom fabric, which is a great touch to your original quilt!

Comments (0) Trackbacks (0)

Sorry, the comment form is closed at this time.

Trackbacks are disabled.